Monthly GTFS Quality Report
City of Simi Valley
·
March 2023
This is a monthly report generated by the California Integrated Travel Project (Cal-ITP) and Caltrans. It summarizes progress towards the California Transit Data Guidelines, in addition to providing a snapshot of transit service characteristics such as service hours. This report is available for viewing by the general public to support continuous improvement of GTFS data and the experience of transit passengers.
Current GTFS Feed Info
None
0.0
65
1,308
About the Realtime Completeness Charts
- These charts show the percentage of Scheduled Trips with at least one Trip Update or Vehicle Position message assigned to that trip.
- High percentages with flat lines are best and indicate large amounts of realtime information for customers.
- Short drops may indicate schedule inaccuracies, missed runs (buses not on schedule), or hardware failures.
Trip Updates Completeness by Day
Vehicle Positions Completeness by Day
About the Median Message Age Charts
- These charts show the daily average age of the median message for Trip Updates and Vehicle Position messages over time.
- The charts provides insights into how long it takes to get messages from the vehicles to riders. Lower latencies are better.
- Higher latencies may indicate outdated hardware or technical failures.
Median Trip Update Message Age
Median Vehicle Positions Message Age
Technology Vendors
Via Inc.
Trillium Inc.
GMV Syncromatics Inc
About the March Daily Service Level Charts
- These charts show the total hours of transit service described by the active feed for each day.
- Since service levels often vary by the day of the week, it is split into three charts for weekdays, Saturdays, and Sundays.
- Flat lines indicate consistent levels of service throughout the month.
- Short drops may indicate temporary reduced service, such as for holidays, gaps in feed publishing, or potential inaccuracies.
- Please reach out to our help desk at [email protected] with any questions.
Service hours per weekday in the active feed
Service hours per Saturday in the active feed
Service hours per Sunday in the active feed
About the March Identifier Change Charts
- These charts show the percentage of stop and route IDs that have changed since the previous month.
- Stop and route IDs are important identifiers for GTFS feed consumers to correctly parse feeds.
- It is a GTFS Best Practice to keep these consistent between feed versions whenever possible.
- More than 5% being new or dropped is a cause for attention, especially if there hasn't been a major service or route change.
- Please reach out to our help desk at [email protected] with any questions.
Changes from March 01 to March 31
Consistency with the California Transit Data Guidelines
The following checks measure adherence to the GTFS Compliance (Schedule) and GTFS Compliance (Realtime) portions of the California Transit Data Guidelines.
The following symbols are used to denote each check's outcome on the given date:
- Pass
- Fail
- Not applicable/data unavailable
Checks marked with an asterisk (*) are periodically performed manually. We can update these on request, so let us know if one of them looks off. For agencies participating in a regional GTFS feed, such as the Bay Area 511 feed, the "No errors in MobilityData GTFS Schedule Validator" check may show a Fail if there are any validation errors present in the regional feed, even if the single-agency feed contains no errors. We believe this is unlikely to impact the rider experience.
| GTFS Schedule Compliance Check | 2023-03-04 | 2023-03-18 | |
|---|---|---|---|
| A GTFS Schedule feed is listed | | | |
| GTFS schedule feed downloads successfully | | | |
| No errors in MobilityData GTFS Schedule Validator | | | |
| GTFS Schedule feed is published at a stable URI (permalink) from which it can be “fetched” automatically by trip-planning applications* | | | |
| Includes an open license that allows commercial use of GTFS Schedule feed* | | | |
| GTFS Schedule feed ingested by Google Maps and/or a combination of Apple Maps, Transit App, Bing Maps, Moovit or local Open Trip Planner services* | | | |
| GTFS RT Compliance Check | 2023-03-04 | 2023-03-18 | |
| A Vehicle positions feed is listed | | | |
| A Trip updates feed is listed | | | |
| A Service alerts feed is listed | | | |
| Vehicle positions RT feed is present | | | |
| Trip updates RT feed is present | | | |
| Service alerts RT feed is present | | | |
| The Vehicle positions feed produces no errors in the MobilityData GTFS Realtime Validator | | | |
| The Trip updates feed produces no errors in the MobilityData GTFS Realtime Validator | | | |
| The Service alerts feed produces no errors in the MobilityData GTFS Realtime Validator | | | |
| Vehicle positions feed is published at a stable URI (permalink) from which it can be “fetched” automatically by trip-planning applications* | | | |
| Trip updates feed is published at a stable URI (permalink) from which it can be “fetched” automatically by trip-planning applications* | | | |
| Service alerts feed is published at a stable URI (permalink) from which it can be “fetched” automatically by trip-planning applications* | | | |
| Includes an open license that allows commercial use of Vehicle positions feed* | | | |
| Includes an open license that allows commercial use of Trip updates feed* | | | |
| Includes an open license that allows commercial use of Service alerts feed* | | | |
| Realtime feeds ingested by Google Maps and/or a combination of Apple Maps, Transit App, Bing Maps, Moovit or local Open Trip Planner services* | | | |
| MobilityData GTFS Schedule Validator notices observed (read more about the validator here) | |||
| Error Name | Error Description | Severity | |
| unknown_file | A file is unknown. | INFO | |
| leading_or_trailing_whitespaces | The value in CSV file has leading or trailing whitespaces. | WARNING | |
| route_color_contrast | A route's color and route_text_color should be contrasting. | WARNING | |
| route_short_name_too_long | Short name of a route is too long (more than 12 characters). | WARNING | |
| route_short_and_long_name_equal | A single route has the same values for route_short_name and route_long_name. | WARNING | |
| missing_recommended_field | The given field has no value in some input row, even though values are recommended. | WARNING | |
| stop_without_stop_time | A stop in stops.txt is not referenced by any stop_times.stop_id, so it is not used by any trip. | WARNING | |
| fast_travel_between_consecutive_stops | A transit vehicle moves too fast between two consecutive stops. The speed threshold depends on route type. | WARNING | |
| stops_match_shape_out_of_order | Two stop entries in stop_times.txt are different than their arrival-departure order as defined by the shape in the shapes.txt file. | WARNING | |
| stop_too_far_from_shape_using_user_distance | A stop time entry that is a large distance away from the location of the shape in shapes.txt as defined by shape_dist_traveled values. | WARNING | |
| missing_feed_info_date | Even though feed_info.start_date and feed_info.end_date are optional, if one field is provided the second one should also be provided. | WARNING | |
| same_name_and_description_for_route | The GTFS spec defines routes.txt route_desc as: 'Description of a route that provides useful, quality information. Do not simply duplicate the name of the route.' | WARNING | |
| decreasing_or_equal_stop_time_distance | When sorted by stop_times.stop_sequence, two consecutive entries in stop_times.txt should have increasing distance, based on the field shape_dist_traveled. If the values are equal, this is considered as an error. | ERROR | |
| equal_shape_distance_diff_coordinates | When sorted by shape.shape_pt_sequence, the values for shape_dist_traveled must increase along a shape. Two consecutive points with equal values for shape_dist_traveled and different coordinates indicate an error. | ERROR | |
| equal_shape_distance_same_coordinates | When sorted by shape.shape_pt_sequence, the values for shape_dist_traveled must increase along a shape. Two consecutive points with equal values for shape_dist_traveled and the same coordinates indicate a duplicative shape point. | WARNING | |